Page Contents
Why Should You Reset The Descale Light On Keurig Duo
The scale and calcium that are usually left in Keurig Duo are not harmful. However if you leave them in your brewer, it could affect the performance of the machine. You should always reset your machine to keep it clean and safe.
How to reset the descale light on my Keurig duo, turn off the coffee machine and remove the water tanks. Before descaling the coffee machine, we advise you to check whether the water has stopped flowing for other reasons. If your Keurig coffee maker still won’t brew coffee (and the descaling light stays on) even after descaling with the correct solution, then something is preventing the water from flowing through the inside of the machine properly.
The Keurig descaling light means something is blocking the water flow, so if the Keurig descaling light stays on, you need to find out what is blocking the water flow through your Keurig, possibly an unsafe hose or an oversized cup. in your car. If your Keurig coffee machine did not turn off the light when descaling, you may need to put the machine into descaling mode before it recognizes that it has been descaled. If the descaling light is off and the Keurig shows that the Keurig is brewing coffee but does not come out of the coffee dispenser, consider resetting the machine circuit board. To resolve this issue, descale the Keurig, and unlock the discharge needle and injection tubing before resetting the Keurig control board.
By the way, if you’re interested in How To Preserve Dry Ice, check out my article on that.
To reset your Keurig after descaling, you can use the basic rest/quick reset method. Once the reservoir is properly installed, reconnect the Keurig, turn it on, and run a test infusion to ensure the Keurig is back up and running after a quick reset.
After placing the Keurig descaling solution in the water tank, turn on the Keurig Brewer and place the cap on the drip tray plate. If the coffee maker still does not work, the water tank is installed correctly and there is enough water in it, try cleaning the tank. If you have recently descaled your Keurig coffee machine, you will still need to pour the infusion through two tanks filled with water before the indicator goes out.
To learn about Can you Freeze Soy Milk, check out my article where I cover everything you need to know.
If your Keurig won’t brew water, your Keurig won’t brew a full cup, or if you have coffee grounds in your cup, try cleaning your coffee machine. If you’ve been using Keurig for a long time, you may find that the water in your car is no longer as fresh as it once was.
If you have Keurig Descaler, you may find that the light stays on and your coffee is weak or choppy. Another reason why the Keurig descaling light may come on is if you are using reusable K cups, you can sometimes pack the cup too tightly, which can restrict the flow of water inside the machine. If Keurig Descaler does not turn off the descaling indicator, repeat the process with more solution or descale with vinegar or critical acid and water and leave for a few hours before rinsing.
Depending on how dirty it is, you may need to descale the Keurig several times. You should descale (clean) your Keurig every three months or so; if it’s time to clean it, let us help you. To clean the Keurig, first add vinegar to the water, then run the cleaning cycle.
| Keurig Descaling process | How often? |
| Reset Descale | 1 to 3 months |
| Clean the Keurig | Every 3 months |
After the normal Keurigs descaling process, use 1-2 tablespoons (depending on the size of the device) of citric acid powder in a tank full of water. If you read the label of the official Keurig descaling agent, you will see citric acid as one of the main ingredients. Citric acid is the main ingredient in their solution, but buying a 1-pound bag will be much cheaper than buying their descaling solution (which contains about 50% water). Citric acid is the main ingredient in the Keurigs descaling mix, so if you’re trying to be more practical and want to have a descaling solution you always have around the house instead of a solution bottle, then a citric acid pack might just be the best solution.
Personally, I prefer using vinegar because it doesn’t have health warnings like Keurig’s descaling solution, but if you’ve never descaled your K Cup machine, then this is a good solution to use. Vinegar is the best decalcifier and you can use vinegar to get your car running as soon as possible. Baking soda does not leave any taste or odor after leaving the machine and is therefore considered the ideal descaler for coffee machines.
Limescale is not toxic, but it can reduce the performance of your machine; for this reason, it is best to descale your coffee machine every few months. Ideally, you should run the descaling procedure every two to three months, or more frequently if your machine is used very frequently. People who use their Keurig coffee maker more than once a day are advised to descale their coffee maker at least once every 1-2 months. As part of preventive maintenance, you should descale your coffee maker every 3 months (or if you experience low coffee or lower performance).
If you use Keurig much more than average, you may need to descale more frequently; it just depends. Following Keurig’s recommendations, follow the descaling process above, except that if necessary, you can leave the mixture in Keurig for up to 4 hours instead of the 30 minutes they recommend for their solution. If your Keurig machine still reports descaling after descaling, this means that even more limescale has accumulated inside the Keurig device and you will need to perform another descaling in order for the Keurig descaling program to restart.
If this is the only reason, the coffee machine does not brew coffee, air bubbles appear, the heat-up time is not enough, or parts of the Keurig machine do not assemble easily. To use baking soda for descaling, it must be dissolved in water, otherwise, it can clog water lines and cause various problems with Keurig.
Fill the tank with bottled/tap water, run several brew cycles without inserting k cups to flush the machine, then brew coffee. Pour the solution into the container, turn on the coffee maker, press the cycle button, and let the solution drain into the cup.
What to do if your Keurig says descale, but you already descaled it?
You can repeat the procedure if the descale light is still on, until the descale signal goes off. Look for any sticky particles in your reusable cup, then clean it thoroughly for reusing it. After going through it again the light will turn off.
Why won’t my Keurig turn on after descaling?
In case your Keurig coffee maker is not responding, check if the power cord is plugged into the socket or not. If it is but it still not working, then try it in another socket, and it should work. If another socket also does not work then there must be a fault in the machine.
Why does Keurig still say “Descale” after descaling?
The descaling light on the Keurig indicates that the is a blockage in the water flow. If the light stays on in the machine, you need to get it figured out. You can also expect things such as a dodgy pipe or a too big cup stuck in your machine.