Skip to Content

How To Convert Natural Gas Stove To Propane

How To Convert Natural Gas Stove To Propane

How To Convert Natural Gas Stove To Propane

You can convert a natural gas stove to propane. First of all, turn off the gas to the appliance. You should disconnect the appliance from the natural gas line. Then remove the natural gas burners. After this, connect the appliance to the propane and adjust the burner settings.

Before diving into what it will cost to convert your gas-burning stove to a propane one, first, we have to first define what these two gases are, as well as helping you figure out whether or not it is possible to actually convert the stove to a propane one. Converting a natural gas stove to propane is generally relatively easy, at least technically, although still requires some skill and lots of care. The steps you will be taking to convert your gas stove to propane are not necessarily challenging on their own, but one slip up, an overlooked connection, or a leaky valve could result in a host of nasty situations.

To convert a gas stove to propane, you need to remove the original fittings, attach the new burners, and adjust your settings. You will have to adjust the openings on each burner to make them optimized for propane instead of natural gas.

Keep in mind, your new burners will have a smaller opening on their orifices so less gas can get into the burners, since propane has a higher pressure rating than natural gas. With conversions, you do not want to let too much gas escape through this larger orifice. Propane has high-pressure regulators; so, make the orifice smaller, so a smaller part of gas can enter into the burner.

Settings How To Convert
Need to remove original settingsYou need to remove the original fittings, attach the new burners, and adjust your settings.
Adjust the openings You will have to adjust the openings on each burner to make them optimized for propane instead of natural gas.
Do not let too much gas escapeBecause new burners will have a smaller opening on their orifices so less gas can get into the burners
How To Convert Natural Gas Stove To Propane

When you are changing out your appliances, you have to take care as natural gas has low-pressure regulator built in, whereas propane operates with high-pressure regulator. The biggest stumbling block is natural gas stays at the low-pressure regulator, while some appliances cannot handle the higher propane pressure, even after adjusting. Trying to run your propane appliances on natural gas is likely to produce very little flame, or even zero burner flame, due to the lower-pressure gas and smaller orifices. While some appliances, such as furnaces and water heaters, can be used with natural gas or propane, you cannot convert an electric appliance to run on natural gas or propane.

If you’re interested in Can Bacon Grease Go Bad then you can check that article.

You may be able to convert certain appliances, such as stoves, to use either natural or propane gas. Although propane and natural gas are both fossil fuels and burn the same, you will have to convert appliances when switching to propane. Ideally, when getting a new appliance, you should be sure it includes a conversion kit, should you decide to switch from propane to natural gas over the long term.

There is a reason propane conversion kits exist, and usually, as we saw above, they are not expensive, so there is no reason anyone should be tempted to go with propane over natural gas before the time is right. A fair amount of people might be interested in turning a natural gas stove to propane, but are usually not sure about costs or what tools and parts they would need. It is also possible that buying a new stove ready for propane would be cheaper than buying a one converted from natural gas.

Buying a propane-ready gas stove will minimize your downtime, and will let you enjoy the reliable, safe, and effective benefits of propane. Doing this will ensure that you are safely using a propane stove that has the correct flame size. If you do, this could be extremely dangerous unless your stove has been converted to propane usage.

watch this video to know how to Convert a Natural Gas Stove to Propane 

Using propane with your stove without doing so can also lead to the propane building up pressure on components in your gas stove, which is another element that can lead to an explosion. Because too much propane would be vented all at once, it can lead to incredible amounts of pressure within your stove components. When you light up too much propane, it can lead to a variety of problems, including blowing your stove out, or even having flames come back up through your pipes and into your propane tank, leading to a fatal explosion.

Propane will hold a lot more heat energy, meaning that you will not need as much of it to prepare food. Each unit of propane contains twice the amount of energy per unit than natural gas, so you will need about half the amount of propane than natural gas to get the same amount of heat.

You are basically moving your fuel lines from the natural gas to propane feed, making adjustments to your burner power and gas flow needed along the way. The goal is to move fuel from your home or buildings natural gas line and toward the new propane line, probably the one connected to a home propane tank somewhere on your property.

If you’re interested in Will A Gas Stove Work Without Electricity then you can check that article.

If your range does not come with the kit, your best way to figure out whether or not it is possible to convert to propane is to contact the manufacturer and ask whether or not the range you have is capable of running on either type of gas. If your stove does not come with it, then you will have to figure out if you can convert it.

Once you figure out what it is going to take to convert the stove, determine whether this is a job that you can take on yourself. Follow the instructions provided in your conversion kit, and reference the manual for your appliance to make sure that you are doing it safely. If you cannot manage modifying by yourself, contact a professional for a proper conversion of the appliance.

It is best to consult with a professional during this stage of the conversion, so that you are sure that no propane is leaked. Due to the risk of propane leaks, you will want to leave this part of the job to professionals. It is important to check with a professional when considering making the transition to propane, because the work involved is very technical, and could be hazardous if those doing the work lack the necessary experience.

A licensed professional that is trained and experienced with natural gas, propane, and appliance safety can help you make the conversion with an undimmed sense of peace. Gas Service Technicians can help you determine whether or not your appliances are safe to convert to propane. Ensuring that you have the right appliances for the right fuel is important, as propane is delivered at significantly higher pressures and has much more energy per cubic foot than gas-burning stoves. When it is possible to convert natural gas to propane ranges with most appliances, you should review manufacturer instructions to understand whether conversion is safe, what parts are required to make the conversion — and a few other related safety precautions that should be taken.

Can you change a natural gas stove to propane?

It is possible to switch most appliances from using natural gas to propane, but not all of them. The main issue is that some appliances can’t manage the higher pressure of propane even with adjustments since natural gas is stored at a lower pressure and is therefore kept at a lower pressure.

Does a propane stove burn hotter than natural gas?

One of the most crucial considerations, according to some grilling purists, is that propane burns hotter than natural gas (2500 BTUs vs. 1000 BTUs). Because there is no lead in propane, it emits less greenhouse gas (GHG) and only creates carbon dioxide and water vapor.


How much does it cost to convert a natural gas stove to propane?

Ask your specific gas supplier if they offer this service because some natural gas utilities or businesses will perform the conversion at no cost. Conversion specialists often charge between $150 and $300, though they may charge more or less depending on the situation.

Skip to content